Description
| WEIGHT | ||
| Total | 13,300 lbs (6,032.78 kg) | |
| Hitch | 1,925 lbs (873.17 kg) with conveyor raised and folded | |
| TRANSPORT DIMENSIONS | ||
| Width | 10′ 4″ (3.15 m) | |
| Height | 10′ 1″ (3.07 m) | |
| Length | 19′ 4″ (5.89 m) | |
| OPERATING DIMENSIONS | ||
| Total Width | 10′ 2″ (3.10 m) | |
| Total Width, Tub Raised | 11′ 9″ (3.58 m) | |
| CHASSIS FEATURES | ||
| Towing Arrangement | Clevis hitch | |
| Tires | (2) 16.5L x 16.1 SI – 14 Ply High Flotation Implement Tires | |
| Wheels | (2) 16.1 x w14c – 8 Bolt, 6″ (15.24 cm) Pilot | |
| Bearings | Tapered roller bearings | |
| TUB FEATURES | ||
| Loading Height | 9′ 2″ (2.79 m) | |
| Tub Width at Flare | 10′ 2″ (3.10 m) | |
| Depth | 44.1″ (1.12 m) | |
| Tub Inside dia at Base | 95.5″ (2.43 m) | |
| Tub Wall Thickness | 12 gauge (2.66 cm) | |
| Tub Floor Thickness | 10 gage (3.42 mm) | |
| HAMMERMILL – HEAVY DUTY | ||
| Length | 43″ (109.2 cm) | |
| Diameter, Hammers Extended | 26″ (66.04 cm) | |
| Feed Opening | 28” x 45” (71.1 cm X 114.3 cm) | |
| Hammers | HD-1/2″ (12.7 mm) A.B. Hardened Steel, Swing | |
| Number of Hammers | 64 | |
| Hammer Rods | 1-1/4″ (31.75 mm) Dia, Case-Hardened | |
| Cylinder Plates | HD Mills: 3/8″ (0.95 cm) Thick x 15 3/4″ (40.01 cm) | |
| Cylinder Shaft | 3 1/2″ (8.89 cm) Stress Proof Steel | |
| Bearings | 3″ (7.62 cm) Pillow Block | |
| Drive | PTO through Multiple V-Belts, 1,000 RPM, 1-3/8″ dia. 21 spline shaft, or 1-3/4″ dia. 20 spline shaft | |
| Screens | 1/8″ (3.18 mm), 3/16″ (4.76 mm), or ¼” (6.35 mm) Thick and Various Hole Sizes from 1/8″ (3.18 mm) to 8″ (203.2 mm) – Must Order 2 Screens of Choice With Machine-Not Standard equipment | |
| BELLY AUGERS | ||
| Size | Twin 12″ (30.48 cm) diameter x 48″ (121.92 cm) long | |
| Drive | Hydraulic | |
| DISCHARGE CONVEYOR | ||
| Type | Rubber Belt with cleats | |
| Drive | Hydraulic | |
| Drive & Idler Roller Type | Rubber Lagged Drive Pulley, “Easy Clean” Idler | |
| Length | 21′ (6.4 m) | |
| Width | 24″ (60.96 cm) | |
| Maximum Conveyor Lift Height | 14′ 9″ (4.5 m) @ 40° Incline | |
| Conveyor Lift | Hydraulic | |
| Conveyor Lift Cylinder | 3-1/2″ x 20″ (8.89 cm x 50.8 cm) | |
| Conveyor Fold | Hydraulic | |
| OPERATOR CONTROLS | ||
| Tub Rotation | Wachendorf A35 display switch controlled Clockwise, Stop, & Counter-Clockwise | |
| Tub Speed | Wachendorf A35 with ECU 710 Control Electronic Governor Stabilizes Engine Load by Adjusting Tub Rotation Speed | |
| Conveyor Lift & Fold | Electric/Hydraulic Switch Control Uses Tractor SCV | |
| Tub Tilt | Electric/Hydraulic Switch Control Uses Tractor SCV | |
| Conveyor On/Off | Wachendorf A35 display switch controlled | |
| REQUIREMENTS FOR OPERATION TRACTOR | ||
| PTO Horsepower Required | 150 HP (118.85 kw) to 315 HP (234.9 kw) | |
| Min. Hydraulic Output | 8 gpm at 1,500 psi (30.3 lpm. x 10,345 kPa) | |
| Hydraulic Remote Controls | 1 Double-Acting Control Valves With Quick Coupler Outlets | |
| Electrical | 12 VDC | |
| GRINDER | ||
| Hydraulic Reservoir Capacity | 60 gallons (227.13 L) of Hydraulic Oil (Mobile 423, CENEX Super HTB or Equivalent) |
|
| Mill Grate Kit | This kit includes; 5 removable mill grates, and 6 removable slug bars for improved grinding performance in tough hay and stover | |