| WEIGHT |
|
Total |
5,025 lbs (2279.3 kg) |
|
Tongue (Bale loader fully raised) |
1500 lbs (680.39 kg)) |
|
|
|
| TRANSPORT DIMENSIONS (Bale loader fully raised, deflector folded) |
|
Width |
8′ 4″ (2.54 m) |
|
Length |
14′ 11″ (4.55 m) |
|
Height |
11′ (3.35 m) |
|
|
|
| WORKING DIMENSIONS (With 1 bale, deflector in spread position) |
|
Width |
10′ 10″ (3.30 m) |
|
Length |
14′ 11″ (4.55 m)) |
|
Height |
11′ (3.35 m) |
|
|
|
| WORKING DIMENSIONS (With 2 bales, deflector in spread position) |
|
Width |
10′ 10″ (3.30 m) |
|
Length |
19′ 7″ (5.97 m) |
|
Height |
11′ (3.35 m) |
|
|
|
| CHASSIS FEATURES |
|
Towing Arrangement |
Clevis type hitch. |
|
Jack Capacity |
5,000 lbs. (2,273 kg) |
|
Jack Travel |
10 in (25.4 cm) |
|
Bearing Type |
Tapered Roller |
|
|
|
| BALE LOADER |
|
Type |
Integral 2 Stage, Twin Boom Arms |
|
Bale Tines |
Tubular Steel, 10° Float, 4 Position Width Adjustable |
|
Adjustable Hydraulic Cylinder |
4-1/2 in x 24 in (11.43 cm x 60.96 cm ), Double-Acting |
|
|
|
| BALE CONVEYOR |
|
Type |
3 Roller Chains with Bolt-On Cross Slat |
|
Drive |
Hydraulic Orbital Motor with Adjustable Flow Control |
|
Drive Shaft Bearings |
1-1/4″ (3.18 cm) |
|
Drive Shafts |
1-1/4″ (3.18 cm) |
|
|
|
| BALE SHREDDER CHAMBER |
|
Max. Bale Weight each |
2200 lbs. (998 kg) |
|
Rotor Length |
78 in. (1.98 m) |
|
Rotor Diameter (Flails extended) |
25 in. (63.5 cm) |
|
Rotor Bearing |
Ball, 2″ (5.08 cm) |
|
Number of Flails |
30 |
|
Flail type |
Heavy Duty, 7/16 in. (11.11 mm) thick, 3 lbs. (1.36 kg), Heat Treated Spring Steel, Swinging |
|
Number of Stripper Channels |
1 |
|
Number of Slug Bars |
5 |
|
Slug Bar |
Single point, 9 Adjustment Settings Through a 180° Range |
|
Delivery |
Right Hand Discharge |
|
Deflector |
6 Adjustment Settings through a 120 Degree Range |
|
Max. Horizontal Spread |
Straw, up to 50 ft. (15.24 m) |
|
|
|
| OPERATOR CONTROLS |
|
Loader |
1 Tractor Double-Acting Hydraulic Valve |
|
Bale Conveyor |
1 Tractor Double-Acting Hydraulic Valve |
|
Bale Conveyor Speed |
Conveyor Speed Control Valve |
|
Slug Bar |
Hand Lever with 5 Settings |
|
Deflector |
Hand Lever with 6 Settings |
|
|
|
| REQUIREMENTS FOR OPERATION |
|
PTO Horsepower Required |
65hp (48.5kw) to 155hp (115.6kw) |
|
PTO Type |
1000 RPM, 1-3/8 in. dia. PTO Shaft with 21 Splines with choice of Constant Velocity or Standard PTO shaft |
|
Min. Tractor Hydraulic Output |
8 gpm at 1500 psi (30.3 lpm x 10,345 kPa) |
|
Tractor Hydraulic Controls |
2 Double-Acting Control Valves with Quick Coupler Outlets |
|
Tractor Weight |
Must be of equal or greater weight than that of a 2660 with 2 bales |
|
SMV Sign |
Standard equipment |
|
Road Lights |
Standard equipment |
