Description
| WEIGHT (DRY) | ||
| Total | 34,100 lbs. (15,468 kg) | |
| Axle | 27,900 lbs. (12,656 kg) | |
| Tongue | 6,200 lbs. (2,813 kg) | |
| TRANSPORT DIMENSIONS | ||
| Width | 11 ft. (3.35 m) | |
| Height | 11 ft 6 in (3.51 m) | |
| Length | 31 ft (9.448 m) | |
| ENGINE | ||
| Manufacturer | CATERPILLAR | |
| Model | C15 | |
| Type | In-line, 6 cylinder, 4 -Stroke Diesel | |
| Power Rating | 475 HP (354 kw) or 540 HP (403 kw) | |
| Bore | 5.4 in (137 mm) | |
| Stroke | 6.5 in (165 mm) | |
| Displacement | 983 cu. in. (14.6 L) | |
| Fuel System | Electronic Unit Injector | |
| Aspiration | Turbocharged and air to air aftercooling | |
| Compression Ratio | 16.25 : 1 | |
| Rotation (from flywheel end) | Counter-clockwise | |
| Engine Housing | A sealed enclosure with a rotary screen at the front that removes debris from the air prior to being drawn through the radiator. Air is directed around engine components to provide surface cooling and discourages dust buildup. Air exits out the bottom between the engine and right and left frame channels. 3 generous sized service access doors are provided on both the right and left sides. | |
| Radiator | Staggered Core with 7 fins per inch | |
| Cooling System | 9.2 gal. (34.8 L) | |
| Lube Oil System (refill) | 10 gal (38 L) | |
| Engine Air Induction | Clean air is drawn in front of radiator through an inline separator and dry type air filter with safety element. | |
| Engine Block Heater | 120V / 2000 watt | |
| FLUID COUPLING | ||
| Manufacturer | TRANSFLUID | |
| Model | Model KPTO-19 Fluid Coupling | |
| Type | Drain Type Fluid Coupling | |
| Charge Pump | Gear type | |
| Cooler | Oil to air, thermostatic controlled electric fan | |
| Features | Unloaded engine warm-up, smooth startup, shock and overload protection, absorbs vibrations, electric/hydraulic control valve | |
| Maintenance | Easy access oil filter and drain plug | |
| Fluid Capacity | 9.24 gal (35 L) | |
| HYDRAULIC SYSTEM | ||
| Cooler | Oil to Air, radiator mounted | |
| Pump | Gear type, 2 section, output is 25 & 15 gpm @ 2100 psi., engine mounted | |
| Control Valves | Electric/Hydraulic, 4 valves – 1) 4 spool, 2) single spool, and 1 proportioning | |
| Reservoir Capacity | 50 gallon (171 liter) | |
| Tub Tilt | 3 in x 30 in (7.62 x 76.2 cm) Hydraulic Cylinder | |
| Conveyor Lift | 2) 3 in x 36 in ( 7.62 x 91.44 cm) Hydraulic Cylinders | |
| Conveyor Fold | 2) 3 in x 30 in (7.62 x 76.2 cm) Hydraulic Cylinder | |
| Conveyor Articulation | 2) 2 in x 8 in (5.08 x 20.3 cm) | |
| CHASSIS FEATURES | ||
| Fire Suppression | 2) 20 lbs (9.09 kg) Fire Extinguishers, front mounted on the right and left side of the main frame |
|
| Fuel Capacity | 300 gal (1,135 L) | |
| Lights | Clearance, Directional, and Brake | |
| Towing Arrangement | 5TH WHEEL | |
| Axle | Tandem, rated 22,500 lbs. | |
| HAMMERMILL | ||
| Length | 50″ (127 cm) | |
| Diameter, Hammers Extended | 26″ (66.04 cm) | |
| Feed Opening | 25 in x 52 in (63.5 cm x 133 cm) | |
| Mill Feeding | Mill Grate | |
| Hammers | 1/2” (1.27 cm) AR-Hardened Steel , Swing | |
| Number of Hammers | 88 | |
| Hammer Rods | 1-1/4 in (31.75 mm) dia., Case Hardened | |
| Mill Plates | 1/2″ (1.27 cm) thick X 16″ (40.64 cm) dia. | |
| Mill Shaft | 4-1/2 in (114.3 mm), Stress Proof Steel | |
| Bearings | 4 in (101.6 mm), Pillow Block Bearings | |
| Drive | Direct from Fluid Coupling | |
| Screens | 1/8 in (3.18 mm), 3/16 in (4.76 mm), or 1/4 in (6.35 mm) thick and various hole sizes from 1/8 in (3.18 mm) to 8 in (203.2 mm) | |
| Screen Area | 2,781 sq. in. (7,063.75 sq. cm.) | |
| TUB FEATURES | ||
| Loading Height | 9 ft 6 in (2.89 m) | |
| Tub Width | 11 ft (3.35 m) | |
| Depth | 50 in. (127 cm) | |
| Tub Diameter at Base | 9 ft (2.74 m) | |
| Tub Wall Thickness | 12 gage (2.66 mm) | |
| Tub Floor Thickness | 1/4 in (6.35 mm) | |
| Drive Mechanism | Electro/Hydraulic | |
| Speed control | Electronic Governor | |
| Service Access | Tub opens to 90 degrees to the right side | |
| BELLY CONVEYOR | ||
| Type | Rubber Belt with 3/4 in (19.05 mm) cleats | |
| Width | 36 in (91.4 cm) | |
| Drive | Hydraulic | |
| Drive & Idler Rollers Type | “Easy Clean” | |
| STACKING CONVEYOR | ||
| Type | Rubber Belt with 1-1/2 in (38.1 mm) Cleats | |
| Drive | Hydraulic, Top driven | |
| Drive & Idler Roller Type | “Easy Clean” | |
| Length | 26 ft. (7.92 m) | |
| Width | 30 in. (76.2 cm) | |
| Max. Conveyor Discharge Height | 18 ft 3 in (5.56 m) | |
| Lift | Electric/Hydraulic | |
| Fold | Electric/Hydraulic | |
| Oscillation (50°) | Electric/Hydraulic | |
| OPERATOR CONTROLS CENTRAL COMMAND CONSOLE | ||
| Engine Functions | ||
| Battery Disconnect | Rotating key, switch with power off, lock, power on | |
| Ignition | Rotating key switch with lock, power on, start, run and power off | |
| Throttle | 3-position switch to increase rpm, hold rpm, and decrease rpm | |
| Emergency Engine Stop | 2-position switch, pull out to run and push in to stop | |
| Tub Grinder Functions | ||
| Hammermill | 2-position switch, pull out to engage and push in to disengage 2-position safety switch, push and hold until hammermill begins to spin |
|
| Conveyor Lift | 3-position switch to raise, hold, & lower | |
| Conveyor Oscillation | 3-position switch for right, hold, & left | |
| Conveyor Storage | 3-position switch to fold, hold or to unfold | |
| Belly & Discharge Conveyor | 2-position switch to engage and disengage | |
| Tub Rotation | 3-position switch to operate tub clockwise, stop, & counter-clockwise | |
| Tub Speed | Model RCB93 electronic governor stabilizes engine load by adjusting tub rotation speed | |
| Tub Tilt | 3-position switch to raise, hold, & lower | |
| REAR COMMAND CONSOLE | ||
| Conveyor Lift | 3-position switch to raise, hold, & lower | |
| Conveyor Oscillation | 3-position switch for right, Hold, & left | |
| Conveyor Storage | 3-position switch to fold, hold or to unfold | |